Transmission Chain Manufacturers Introduces The Requirements Fo

  •  

    Transmission Chain Manufacturers introduced that the conveyor chain will wear out after being used for a long time and with high intensity. If you do not pay attention to the operation during use, it may cause great damage to the conveyor chain.
     
    The material of the conveyor chain is poor and the worker's operation is improper. The most easily worn parts of the chain as a whole are the sprocket and the pin. The wear of these two parts is mainly due to insufficient local lubrication. Therefore, in order to avoid this phenomenon, the operator should pay attention to frequently check the lubrication effect, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method.
     
    After the conveyor chain is slightly worn, the sprocket can be reversed so that the lighter wear side faces the chain. In addition, if the use environment is bad or the lubrication and sealing is poor, it will cause the conveyor chain to wear. Once the conveyor chain is worn, the conveyor chain will become longer, and it will easily cause tooth skipping or chain loss during work, reducing the service life of the chain and accelerating the conveyor chain. Invalidate.

    Through the above introduction, Agricultural Chain Manufacturers hopes that you can simply refer to the content of this article in future use.