Roller Chain Maintenance Skills

  •  

    Maintenance skills of Roller Chain :

    1. After the sprocket is severely worn, the new sprocket and the new chain should be replaced at the same time to ensure good meshing. It is not possible to just replace a new chain or new sprocket alone. Otherwise it will cause poor meshing and accelerate the wear of the new chain or new sprocket. When the tooth surface of the sprocket is worn to a certain degree, it should be turned over in time (referring to the sprocket used with adjustable surface) to extend the use time.
    2. The old chain cannot be mixed with part of the new chain, otherwise it is easy to have an impact in the transmission and break the chain.
    3. The chain should be filled with lubricant in time during work. The lubricating oil must enter the matching gap between the roller and the inner sleeve to improve working conditions and reduce wear.

    The above content is organized and shared by Drive Chain manufacturer, hoping to help those in need.