Led Street Light Housing Supplier Introduces The Installation S

  •  

    Led Street Light Housing  Supplier introduces the installation requirements of neon lights

    1. The lamp tube should be intact and undamaged.

    2. The lamp tube should be fixed with a special insulating bracket, and it must be firm. The franchise bracket can be made of glass tube. The minimum distance between the fixed lamp tube and the surface of the building or structure should not be less than 20 mm.

    3. The length of the tube provided by the neon lamp special transformer should not exceed the allowable load.

    4. The installation location of the neon lamp franchise transformer should be concealed and convenient for maintenance, but it should not be installed in a suspended ceiling and should not be touched by non-maintenance personnel. When installed in the open, its height should not be less than 3 meters; when it is less than 3 meters, protective measures should be taken; when installed outdoors, waterproof measures should be taken.

    5. The connecting wire between the secondary conductor of the neon lamp special transformer and the lamp tube should be a high-voltage nylon insulated wire rated not less than 15 volts.

    6. The distance between the secondary wire of the neon lamp franchise unsafe voltage device and the surface of the building and structure shall not be less than 20 mm.

    Through the above introduction, High Quality Street Light Housing Manufacturers hopes that you can simply refer to the content of this article in future use.