Led Street Light Housing Wholesale Shares The Development Of Th

  • Led Street Light Housing Wholesale shares the common fluorescent lamp's ignition is to use a series of iron core inductors and a parallel starter. For this kind of circuit, when the LED flood light is directly replaced, just unplug the starter. However, because the iron core inductor is still connected in series in the circuit, it still brings about 6.4W to 10W (domestic) losses. As a result of this additional loss, the power saving efficiency of the LED is greatly reduced.

    The efficiency of the floodlight housing accessories mainly refers to the effective light effect, because the fluorescent lamp emits light at 360 degrees, and the light emitted in the opposite direction is useless. Therefore, fluorescent lamps usually use a white lampshade, which can reflect a considerable part of the back light. Generally speaking, the efficiency of fluorescent lamps is only about 70%. The LED flood light emits light at 120 degrees, so all light is effective. Although I sometimes feel that the 120-degree light emitting angle is a little narrower, it is still enough in most cases. And this light-emitting angle can also be adjusted as needed.

    The floodlight housing is a kind of led accessory, which is a protective cover for better focusing the light, making the light more concentrated, and reducing the damage of the light to the eyes. The floodlight housing is not only covered on the lamp in order to gather the light together, it can also prevent electric shock, and also has an effect on protecting the eyes, so every led street lamp will have a lamp housing.

    The projection lamp housing is controlled by a built-in microchip. In small engineering applications, it can be used without a controller. It can achieve dynamic effects such as gradual change, transition, color flicker, random flicker, and gradual alternation. It can also be controlled by DMX. Realize the effects of chasing and scanning. At present, the main application places of the floodlight housing are probably these: single building, historical building group exterior wall lighting, building interior light and exterior lighting, indoor local lighting, green landscape lighting, billboard lighting, medical culture and other special facility lighting , Bars, dance halls and other entertainment venues atmosphere lighting and so on.

    Floodlight housing lighting is a period of vigorous development, but the use of floodlight housing products can often be seen in various building curtain walls, building round frames, recreational landscape decoration, KTV, various bridge lighting, etc. Among them, the application of the floodlight housing guardrail tube is particularly extensive.

    The floodlight housing guardrail tube is used in the external interface, LED silicone seal, internal circuit exposure, large temperature difference between day and night, end cover and thermal expansion and contraction, resulting in cracks in the silicone seal, after rain and rain enter the room, you can imagine what the result will be. In order to solve this problem, there are some requirements for the internal circuit and the housing of the floodlight. The silicone sealing cover is simple, but the reliability is not high, and it is used in large-scale outdoor applications.

    The above content is organized and shared by China Aluminum Die-cast LED Street Light Housing Suppliers ,hoping to help those in need.