Electric Bike Factory Introduces The Battery Usage Process

  •  

    Electric Bike Factory introduces that the mileage is insufficient after a single charge of the battery. The "continuation mileage" is to be fully charged when the new battery is charged. The rider weight is 75kg, the ambient temperature is (25±5°C), and the wind speed is not more than 3m/s. Ride on secondary roads, and power off when the battery voltage is less than 10.5V, and the mileage obtained under the above conditions.

    There are many factors that affect the continued mileage: for example, the degree of battery life, a set of brand new batteries, the actual "continuation mileage" may exceed 50Km, and the battery that has been used for a period of time, the "continuation mileage" will decrease. This is mainly due to the decrease in battery capacity over time. In addition, the actual load weight, whether the road surface is flat, whether there is up and downhill, wind speed, wind direction, braking during driving, the number of starts, whether the tires are fully inflated, the correct charging method, the temperature of the environment and other factors will affect the actual situation. The length of the “travel mileage” (at 25°C standard temperature, every 1°C drop will shorten the continued mileage by approximately 0.5km).

    Through the above introduction, Fast Sport Electric Motorbike Manufacturers hopes that you can simply refer to the content of this article in future use.