Electric Bike Factory Introduces The Inspection Process Of Batt

  •  

    Electric Bike Factory introduces the inspection skills of battery cars:

    1. Tires: If the tire pressure of an electric vehicle is insufficient, it will increase the friction between the tire and the road, thereby shortening the mileage; it will also reduce the turning flexibility of the handlebar, which will affect the comfort and safety of riding. When the air pressure is insufficient, the air pressure should be supplemented in time.

    2. Handlebar: The handlebar should be lubricated or adjusted in time when it is not flexible, jammed, frozen, or tight. Lubrication generally uses butter, calcium-based, or lithium-based grease; when adjusting, first loosen the front fork lock nut and rotate the front fork to the upper gear. When the handlebar rotation flexibility meets the requirements, lock the front fork lock nut.

    3. Lights: Check the lights, horns, etc. before using electric vehicles, especially at night. The headlights should be bright, and the beam should generally fall in the range of 5-10 meters in front of the car; the flashing frequency of the lights should be 75-80 times per minute; the instrument display should be normal.

    4. Battery power: Before traveling, check the battery power of the electric vehicle, and judge whether the battery power is sufficient according to the mileage of the trip. If the battery is not sufficient, charge it in time to avoid the under-voltage operation of the battery.

    5. Motor: The working condition of the motor should also be checked before traveling. Start the motor and adjust its speed to observe and listen to the operation of the motor. If there is any abnormality, repair it in time.


    Through the above introduction, Fast Sport Electric Motorbike Manufacturers hopes that you can simply refer to the content of this article in future use.