Stainless Steel Handmade Sink Manufacturers Share The Requireme

  • Today, Stainless Steel Handmade Sink Manufacturers is sharing the difference between a manual sink and a general sink.

    1. The so-called manual sink is made by hand. Usually, the thickness of the sink is 1.2-1.5mm. The stainless steel sheet of this thickness cannot be stretched on the mold and will break once punched. The thickness of the ordinary stretching tank is not more than 0.8mm, so the first difference between the two tanks is the difference in thickness.

    2. Secondly, the hand-made sinks are all hand-built. It is mainly made by laser welding. Therefore, the requirements for plates and equipment are relatively high. Most of them use stainless steel sheets of 304 or more, so the cost of manual sinks is also higher. The ordinary water tank is stamped by a die, the sheet is thin, and the drawing shape is also easier. The low-grade stainless steel sheet such as 201 is generally used, so the cost is relatively low.

    3, the surface of the manual sink is fine brushed, this treatment can highlight the texture of the sink, giving a sense of luxury and high-end. The surface of the stretching tank is treated with the pickling of pearl sand, the cost is low, the process is simple, and the appearance is not so high.

    information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/